Gypsum Primer




DUBOND'S HYDRO PRIME is water based synthetic resin micro emulsion in aqueous dispersion concentrated surface insulation priming product that reduces and regulates the absorption of water in highly porous substrates. It is characterized by high penetration on porous substrates such as cementitious, anhydrite screeds, gypsumbased plaster, plasterboard, etc. Professional , superior technology, concentrated water based surface insulation product which netrulizes the expansive chemical reaction of anhydrite screeds, gypsum-based plaster on contact with cement based adhesive , stabilizes the surface consistency by supressing the dust. Hydroprime does not produces the fumes that may be harmful to humans or to the environment , Hence it can be safely used with no contradictions in internal environments. The technology ensures excellent workability in all conditions , thanks to the wide water range, depending on the specific characteristics of the substrate.

  • Green Building Rating
  • Mineral≥30%
  • Low Emission
  • Low Ecological Impact
  • Health Care
  • Water Based


Areas of Application

  • Basements (where hydrostatic pressure exists)
  • Dams
  • Swimming pools
  • Tanks & reservoirs
  • Retaining walls
  • Terrace Slabs


Features & Benefits

  • Does not produces the fumes
  • Netrulizes the expansive chemical reaction
  • Superior technology
  • Surface insulation priming product that reduces and regulates the absorption of water in highly
  • porous substrates.
  • Water based synthetic resin micro emulsion in aqueous dispersion


Method of Application
the single pack of Hydroprime compound (water based synthetic resin micro emulsion) should be mixed with water in the ratio of 1 : 1 ( 1 liter of hydroprime : 1 liters of water ). Minimum 2 (two) coats are recommended by brush application for best results of the product.SafetyAvoid contact with skin and eyes, Incase of contact with eyes or skin, wash thoroughly with plenty of water and contact doctor.


Specifications

Appearance Green Liquid
Warning Protect from frost Avoid direct exposure to sunlight and sources of heat
Insulation product for gypsum and anhydrite Ready-to-Use
Regulation of substrate absorption 1 part Hydro Prime : 2-3 part water
pH 9.65
Temperature range for application From +5˚C to +45˚C
Minimum waiting time before laying : Insulation product for gypsum and anhydrite > 4 hours
Minimum waiting time before laying Regulation of substrate absorption < 1 hours
Maximum waiting time before laying > 24 hour
Minimum waiting time before laying Coverage ~0.15 - 0.25 kg/m2
Coverage Approx 4-5 m / ltr. / coat. (Coverage depends on porosity of the surface.)
Storage All tools must be cleaned with water immediately after use.
Shelf Life 12 months from the date of manufacturing, in original packaging

Additional Information

Packaging Details 1ltr, 5 ltr & 20 ltr of container.




Looking for Product Name ?