Hydro Lastik Strip 160 Chemical




Hydro Lastik Strip 160 ( Fiberglass Tape ) is a ready-to-use, thin, strong yet flexible alkali-resistant mesh for embedment with waterproofing and crack-isolation membrane on residential and commercial floor joints & corners. HydroLastik Strip 160 reinforces and improves the performance of Hydrobuild’s waterproofing products when applied over cracks, coves and corners and around drains on residential and commercial applications. It has excellent compatibility with all cement- or epoxy-based mortars.

  • Green Building Rating
  • Low Ecological Impact
  • Health Care


Areas of Application

  • Indoor & Outdoor waterproofing treatment of the corners between walls & floors.
  • Between Adjacent walls and for dividing joints.
  • Used in screeds waterproofed with Hydrobuild waterproofing products.
  • Used as waterproofing treatment of joints in swimming pools.


Features & Benefits

  • Compatible with Dubond’s HydroCrete, HydroCoat, HydroCoat Osmocem, Hydro Gum waterproofing products for complete system protection
  • Durable
  • Flexible and lays flat
  • Making it easy to embed
  • Fast to install
  • Ready to use
  • Easy to cut with scissors or razor knife


Method of Application
After having applied a first layer of waterproofing products like HydroCrete, HydroCoat, HydroCoat Osmocem or HydroLastik in an even coat desirable as per the requirment of the waterproofing conditions using the smooth trowel, spray or brush application. Laying of the strip over the first coat of the application done of the joints and corners, positioning it in the vertical or horizontal directions and overlapping the joints by at least 10 cm. Add HydroLastik strip 160 sloping at 45° on a level with windows and door openings. To improve the ability of the finish to withstand impact, it is also advisable to use two layers of HydroLastik strip 160 in the corners where impact is liable to occur.

Precautions & Limitations
Do not use HydroLastik strip 160 over any expansion joint or control joints.


Specifications

Appreance Glass Fibers
Colour White
Application Temperature Composition Temprature from - 20˚C to +45˚C 100 % fiber glass netting with 4 x 5 mm mesh width
Width 16 Centimeter.
Width of rubber part 07 Centimeter
Weave Leno
Shear Adhesion After 7 days ≥ 3.5 MPa EN 1324
Tensile Adhesion On Concrete After 28 Days. ≥ 2 MPa EN 1348
Durability Test : Adhesion After Heat Action ≥ 3.5 MPa EN 1324
Durability Test Adhesion After Immersion Into Water ≥ 0.5 MPa EN 1324
Adhesion After High Temperature ≥ 3.5 MPa EN 1324
Working Temperature From - 30°C to + 90°C
Conformity D2TE EN 12004
Shelf Life & Storage 2 years when stored in original unopened container, store in a cool dry place.

Additional Information

Packaging Details Avaliable in 25 meters rolls. Also available in squares.




Looking for Product Name ?