Under Coat Primer for Tiles & Stones




Dubond's Tile & Stone Primer is a water base nano particle aqueous dispersion. It is designed as a barrier to prevent water, alkali and other compounds from reaching the substrate surface and to avoid efflorescence that can cause surface discoloration especially in cement substrates.

Green Building Rating-Mineral > 30%, Low Emission,  Low Ecological Impact,Health Care,Water Based

Areas Of Application-Stones and porous tiles. Interior & exterior Wall & floors Natural porous stones & tiles Concrete surfaces before painting or laying of tiles to prevent efflorescence and providing water resistance Upper substrate acts as a adhesion promoter

Feature & Benefits-Water base nano particle aqueous dispersion It is designed as a barrier to prevent water, alkali and other compounds from reaching the substrate surface.

Method Of Application-Wash the substrate by clean water and allow if to dry apply primer by soft bristle brush and led it to dry 6 to 8 hours. The surface area has been primed now apply any another product.

Shelf Life & storage-6 months in original sealed packing kept in cool and dry place. store in a dry place in the original container.

Health & safety Precautions-Keep out of reach of children. wear suitable protective clothing, gloves, and eye / face protection. after contact with skin wash immediately with plenty of clean water. in case of contact with eyes, rinse immediately with plenry of clean water and seek medical advice.


Specifications

Appearance Limpis viscous emulsion
colour white liquuid
pH N/A
Spec. Gravity (20°C): 1,070 Gr. ⁄Cc
Flashing Point 30°
Coverage Approximately I liter of Stone seal covers about 10- IS hf of floor depending upon the substrate

Additional Information

Packaging Details Available in 500 ml, 1 liter , 5 liter, 20 liters , containers.




Looking for Product Name ?